Tuesday, April 24, 2018

DIY Water Leak Alarm with Automatic Water Pump Disconnect Relay

The SHUREflo Accumulator in our Agile developed a small leak, and as usual, I forgot to switch off the water pump and it continued to cycle on and off while we were gone for a hike…luckily, it was a short hike and was immediately greeted by the blaring water leak alarm sound as soon as got into the van.

For the above reason, I decided to build a water leak alarm with automatic water pump disconnect relay. The idea is to disconnect the water pump when sensor senses water; additional wired sensors or maybe wireless sensors can be added later.

Things you need for this project (clicking on the links will take you to Amazon):
·        Rain sensor module with relay control
·        Automotive heavy duty 5-pin 40/30-amp relay
·        16 or 14- gauge wires
·        2-3 feet of smaller gauge wires for the sensor
·        12-volt Piezo Electronic Buzzer Alarm
·        Project enclosure
·        SPST switch
·        Cable gland (optional)


Monday, December 11, 2017

DIY Portable Power Station/ Jump Starter and Battery Charger with Bluetooth Stereo Speakers


Most of the parts used in this project were unused stuff and taking up garage space, the Walmart 12-volt battery was purchased last year to temporarily replace the original RT coach batteries that got fried during our summer road trip, the inverter is my old 750-watt Trip Lite Inverter/ Charger.

Obviously this is not for RV use, but can be a great power source while picnicking at the park, at the beach, etc. or just something to brag around, lol. It can also be used as a jump starter or a car battery charger. It has built-in 200-watts Bluetooth wireless stereo speakers, good for entertaining or annoying crowds at the park.


Tuesday, October 31, 2017

DIY Hitch Mounted Vertical Bike Rack/ Cargo Carrier that Does Not Interfere with the Rear Spare Tire


Adding a hitch mounted bike carrier has been a problem on RT’s that are equipped with rear mounted spare tire carrier. I’ve seen many attempts by RT owners to negate this problem, from using hitch extenders to experimenting with different available bike carriers on the market. Clearing the spare tire is only half of the problem. Opening the Sprinter rear doors and lowering the spare tire with a hitch bike carrier mounted either with bikes loaded or unloaded is another huge problem not to mention the added length to the vehicle with the addition of hitch extender.

Friday, October 6, 2017

Installing Coach Battery Powered 12-volt DC sockets on Sprinter Dashboard

My 2011 Agile has two factory 12-volt DC sockets located in the cab, one by the pull-out cup holder (only powered when engine is running) and one just below the pull-out cup holder which is always powered. The MB factory sockets are wired into the chassis battery.

I installed 2 additional 12-volt DC sockets for charging our phones/ tablets/ cameras/etc. I wired the new sockets from the coach battery so as not to put extra drain into the starting battery when we are out dry camping. The additional sockets were installed on the outer sides of the dashboard top vents thus minimizing charging cables clutter hanging from the dashboard and interfering while driving. I opted for 12-volt DC sockets and use plug-in USB car chargers in lieu of surface- mount USB charger sockets for more universal mobile charging approach. Also replacing a malfunctioning USB charger with our setup would be much easier, not so with the surface- mount USB charger sockets.