DIY Rear Table Swivel Adapter/ Roadtrek Rear Table Modification

Getting in and out of the rear table has been a problem for us, there is barely enough room to move around it. You literally have to suck your guts in to squeeze through around the table. Moving the tabletop base further off-center is not an option for me as it will put too much strain on the tabletop, not to mention the modification needed for its storage. The tabletop also doubles a bed platform and cannot be modified or shortened.

My solution is to modify the table leg and adding a swiveling arm. The swivel arm will add 6-inches off-set of the tabletop from the center pole and allows the table to easily swivel out of the way if needed. It only needs few materials which are readily available at your local home improvement store but it does involve some metal welding/fabricating.

The rear table swing-away adapter.

Wall Mounted Shoe Storage Rack for Roadtrek Agile

Finding a place to keep our shoes inside the Agile has always been a problem, it's either we keep them on the door mat by the sliding door entrance or in the rear storage compartment. Our shoes are always on the way and taking valuable storage space plus it looks untidy and unorganized.

The shower wall facing the cab is the perfect and convenient place to store our shoes. If shoes are placed vertically against the wall it would only take very little space and should not be on your way getting in and out the RV. The shoe storage rack is fabricated from 1/4 inch thick acrylic plastic sheet and tarp bungee cords to hold the shoes in place. The posts that holds the bungee cords are made from 1/2 inch thick acrylic plastic. The shoe rack was painted black to match the appliances trim colors. I use 3M VHB tape to attach the shoe rack on the wall. Make sure the shoe rack is resting against the floor when using double sided tape as fastener to prevent unnecessary vertical shear tension on the wall plastic veneer finish.

The shoe rack size dimensions are specifically made for our shoe sizes.  If you have wider shoes, you might not be able to fit 2 pairs side by side as the shower wall width is limited. To save you the trouble, carefully measure everything before you start. Have fun building!

If DIY is not for you, Amazon has variety of "Wall Mounted Shoe Racks" products that might interest you.

Simple Showerhead Mod

Problem #1: During shower, Agile's showerhead spray pattern automatically reverts back to normal center aerated spray when the water is turned off. Most people including myself will turn the water off and on when showering to save water. An easy fix to prevent it from reverting to normal spray is to remove the spring  from the spray selector button inside the showerhead as pictured below.

 

DIY Soda Can Organizer/ Dispenser

To save space in our tiny refrigerator, I made an acrylic soda can organizer/ dispenser. It holds 7 soda cans and is gravity feed. The dispenser base has a small channel that securely rest on the fridge divider railing to prevent it from sliding out during travel. Here's how it looks like.

Adding a Wireless Remote Control to the Macerator

Dumping the holding tanks with Roadtrek macerator system is pretty easy and quick, although the switch location which activates the macerator pump is not very ideal. The switch is located on the frame of the driver seat facing the driver side door. To operate the macerator you have to open the driver side door and reach for the red switch, and since it is momentary switch you have to hold the switch the entire dumping process. It is a minor inconvenience, but leaving the driver side door open while dumping the holding tanks is an open invitation for flies/ bugs to get in the RV not to mention when it is raining...I thought, there could be a better solution.

At first I thought of replacing the momentary switch with an on/off rocker switch, but someone could accidentally flip the switch on and run the macerator dry causing early macerator failure. RT used a momentary switch there for a reason.

My solution is a wireless on/off momentary switch. Again I decided to go with a momentary switch on the wireless controller as for the above reason.  The wireless controller and remote transmit/receives analog signals which is prone to radio wave interferences that could inadvertently activate the controller. Although I am using a separate switch to power the wireless controller, there is always a chance of forgetting to turn it off.